PLANET XGS3-24040 - Manual (Page 180)

Chapter 21 Layer 3 Forward Configuration
21-10
(6) Configure Tunnel Mode
Command Explanation
Tunnel Configuration Mode
tunnel mode ipv6ip [6to4 | isatap]
no tunnel mode ipv6ip [6to4 |
isatap]
Configure tunnel mode. The NO command
clears tunnel mode.
(7) Configure Tunnel Routing
Command Explanation
Global mode
ipv6 route
<ipv6-address/prefix-length>
{<interface-type interface-number>
| tunnel <tnl-id>}
no ipv6 route
<ipv6-address/prefix-length>
{<interface-type interface-number>
| tunnel <tnl-id>}
Configure tunnel routing. The NO command
clears tunnel routing.
21.2.3 IP Configuration Examples
21.2.3.1 Configuration Examples of IPv4
Figure 1-1 IPv4 configuration example
The user’s configuration requirements are: Configure IP address of different network segments on Switch1
and Switch2, configure static routing and validate accessibility using ping function.
Configuration Description:
1． Configure two VLANs on Switch1, namely, VLAN1 and VLAN2.
2． Configure IPv4 address 192.168.1.1 255.255.255.0 in VLAN1 of Switch1, and configure IPv4
address 192.168.2.1 255.255.255.0 in VLAN2.
Switch2
Switch1
PC2
PC1