PLANET XGS3-24040 - Manual (Page 77)

Chapter 5 File System Operations
5-3
10. The copy operation of files
Command Explanation
Admin Configuration Mode
copy <source-file-url > <dest-file-url> Copy a designated file one the switch and
store it as a new one.
5.3 Typical Applications
Copy an IMG file flash:/nos.img stored in the FLASH on the boardcard, to cf:/nos-5.2.1.0.img.
The configuration of the switch is as follows:
Switch#copy flash:/nos.img flash:/nos-5.2.1.0.img
Copy flash:/nos.img to flash:/nos-5.2.1.0.img? [Y:N] y
Copyed file flash:/nos.img to flash:/nos-5.2.1.0.img.
5.4 Troubleshooting
If errors occur when users try to implement file system operations, please check whether they are caused by
the following reasons
 Whether file names or paths are entered correctly.
 When renaming a file, whether it is in use or the new file name is already used by an existing file or
directory.