PLANET XGS3-24040 - Manual (Page 318)

Chapter 39 BGP
39-12
8．Adjust BGP Timers
（1） Configure the BGP timer of all the neighbors
Command Explanation
BGP configuration mode
timers bgp <keep alive> <holdtime>
no timers bgp
Configure the BGP timers of all the
neighbors; the no timer bgp command
recovers the default value.
（2） Configure the timer value of a particular neighbor
Command Explanation
BGP configuration mode
neighbor { <ip-address> | <TAG> } timers <keep
alive> <holdtime>
no neighbor { <ip-address> | <TAG> } timers
Configure the keep alive and
holdtime timer of a particular
neighbor; the no neighbor
{ <ip-address> | <TAG> }
timers command recovers the
default value.
9．Adjust BGP announcement Interval
Command Explanation
BGP configuration mode
neighbor {<ip-address> | <TAG>}
advertisement-interval <seconds>
no neighbor {<ip-address> | <TAG>}
advertisement-interval
Configure the minimum interval among
BGP routes update information; the no
neighbor {<ip-address> | <TAG>}
advertisement-interval command
recovers the default setting.
10． Configure the Local Preference Value
Command Explanation
BGP configuration mode
bgp default local-preference <value>
no bgp default local-preference
Change default local preference; the no bgp
default local-preference command
recovers the default value.
11． Enable sending default route
Command Explanation
BGP configuration mode