PLANET XGS3-24040 - Manual (Page 284)

Chapter 37 OSPF
37-8
area <id> {authentication [message-digest]
| default-cost <cost> | filter-list {access |
prefix} <WORD> {in | out} | nssa
[default-information-originate |
no-redistribution | no-summary |
translator-role] | range <range> | stub
[no-summary] | virtual-link <neighbor>}
no area <id> {authentication | default-cost |
filter-list {access | prefix} <WORD> {in |
out} | nssa [default-information-originate |
no-redistribution | no-summary |
translator-role] | range <range> | stub
[no-summary] | virtual-link <neighbor>}
Configure the parameters in OSPF area
(STUB area, NSSA area and virtual
links); the no area <id> {authentication
| default-cost | filter-list {access |
prefix} <WORD> {in | out} | nssa
[default-information-originate |
no-redistribution | no-summary |
translator-role] | range <range> | stub
[no-summary] | virtual-link
<neighbor>} command restores the
default settings.
4）Configure the priority of the interface when electing designated layer3 switch (DR).
Command Explanation
Interface Configuration Mode
ip ospf priority <priority>
no ip ospf priority
Sets the priority of the interface in “designated
layer3 switch” election; the no ip ospf priority
command restores the default setting.
5）Configure to keep a log for OSPF adjacency changes or not
Command Explanation
OSPF Protocol Configuration Mode
log-adjacency-changes detail
no log-adjacency-changes detail
Configure to keep a log for OSPF adjacency
changes or not.
3. Disable OSPF protocol
Command Explanation
Global Mode
no router ospf [process <id>] Disables OSPF routing protocol.