PLANET XGS3-24040 - Manual (Page 453)

Chapter 46 ACL Configuration
46-15
<time-range-name>] extended
IPV6 access rule.
[no] {deny | permit} {<sIPv6Prefix/sPrefixlen> |
any-source | {host-source <sIPv6Addr>}}
{<dIPv6Prefix/dPrefixlen> | any-destination |
{host-destination <dIPv6Addr>}} [dscp <dscp>]
[flow-label <flowlabel>] [time-range
<time-range-name>]
Creates an extended
name-based IPV6 access
rule; the no form command
deletes this name-based
extended IPV6 access rule.
c. Exit extended IPv6 ACL configuration mode
Command Explanation
Extended IPV6 ACL Mode
exit Exits extended name-based
IPV6 ACL configuration
mode.
2. Configuring packet filtering function
(1) Enable global packet filtering function
Command Explanation
Global Mode
firewall enable
Enables global packet
filtering function.
firewall disable
Disables global packet
filtering function.
(2) Configure default action.
Command Explanation
Global Mode
firewall default {permit |deny}[ipv4|ipv6|all]}
Sets default action to
firewall.
3. Configuring time range function
（1）Create the name of the time range
Command Explanation
Global Mode
time-range <time_range_name>
Create a time range named
time_range_name.