PLANET XGS3-24040 - Manual (Page 176)

Chapter 21 Layer 3 Forward Configuration
21-6
ipv6 route
<ipv6-prefix/prefix-length>
{<nexthop-ipv6-address>|<interfac
e-type interface-number> |
{<nexthop-ipv6-address>
<interface-type
interface-number>}} [distance]
no ipv6 route
<ipv6-prefix/prefix-length>
{<nexthop-ipv6-address>|<interfac
e-type interface-number>
|{<nexthop-ipv6-address>
<interface-type
interface-number>}} [distance]
Configure IPv6 static routing. The no
command cancels IPv6 static routing.
2. IPv6 Neighbor Discovery Configuration
(1) Configure DAD Neighbor solicitation Message number
Command Explanation
Interface Configuration Mode
ipv6 nd dad attempts <value>
no ipv6 nd dad attempts <value>
Set the neighbor query message number sent in
sequence when the interface makes duplicate
address detection. The no command resumes
default value (1).
(2) Configure Send Neighbor solicitation Message Interval
Command Explanation
Interface Configuration Mode
ipv6 nd ns-interval <seconds>
no ipv6 nd ns-interval <seconds>
Set the interval of the interface to send neighbor
query message. The NO command resumes
default value (1 second).
(3) Enable and disable router advertisement
Command Explanation
Interface Configuration Mode
ipv6 nd suppress-ra
no ipv6 nd suppress-ra
Forbid IPv6 Router Advertisement. The NO
command enables IPv6 router advertisement.
(4) Configure Router Lifespan
Command Explanation
Interface Configuration Mode