PLANET XGS3-24040 - Manual (Page 399)

Chapter 43 Ipv4 Multicast Protocol
43-53
3. Configure IGMP Proxy assistant parameter
Command Explanation
Global Mode
ip igmp proxy limit {group <1-500>| source
<1-500>}
no ip igmp proxy limit
To configure the maximum number of groups
that upstream ports can join, and the
maximum number of sources in a single
group. The no form of this command will
restore the default value.
ip igmp proxy unsolicited-report interval
<1-5>
no ip igmp proxy unsolicited-report
interval
To configure how often the upstream ports
send out unsolicited report. The no form of
this command will restore the default
configuration.
ip igmp proxy unsolicited-report
robustness <2-10>
no ip igmp proxy unsolicited-report
robustness
To configure the retry times of upstream ports’
sending unsolicited reports. The no form of
this command will restore the default value.
ip igmp proxy aggregate
no ip igmp proxy aggregate
To configure non-query downstream ports to
be able to aggregate the IGMP operations.
The no form of this command will restore the
default configuration.
ip multicast ssm range <1-99>
ip multicast ssm default
no ip mulitcast ssm
To configure the address range for IGMP
proxy ssm multicast groups; The no form of
this command will remove the configuration.
ip igmp proxy multicast-source
no ip igmp proxy multicast-source
To configure the port as downstream ports for
the source of multicast datagram; The no
from of this command will disable the
configuration.