PLANET XGS3-24040 - Manual (Page 179)

Chapter 21 Layer 3 Forward Configuration
21-9
3. IPv6 Tunnel Configuration
(1) Add/Delete tunnel
Command Explanation
Global mode
interface tunnel <tnl-id>
no interface tunnel <tnl-id>
Create a tunnel. The NO command deletes a
tunnel.
(2) Configure tunnel description
Command Explanation
Tunnel Configuration Mode
description <desc>
no description <desc>
Configure tunnel description. The NO command
deletes the tunnel description.
(3) Configure tunnel source
Command Explanation
Tunnel Configuration Mode
[tunnel soure { <ipv4-address> |
<interface-name> }
no tunnel soure { <ipv4-address> |
<interface-name> }
Configure tunnel source end IPv4 address. The
NO command deletes the IPv4 address of tunnel
source end.
(4) Configure Tunnel Destination
Command Explanation
Tunnel Configuration Mode
tunnel destination <ipv4-address>
no tunnel destination
<ipv4-address>
Configure tunnel destination end IPv4 address.
The NO command deletes the IPv4 address of
tunnel destination end.
(5) Configure Tunnel Next-Hop
Command Explanation
Tunnel Configuration Mode
tunnel nexthop <ipv4-address>
no tunnel nexthop <ipv4-address>
Configure tunnel next-hop IPv4 address. The
NO command deletes the IPv4 address of tunnel
next-hop end.