PLANET XGS3-24040 - Manual (Page 317)

Chapter 39 BGP
39-11
this setting.
neighbor { <ip-address> | <TAG> } weight
<weight>
no neighbor { <ip-address> | <TAG> } weight
Configure BGP neighbor weights;
the no neighbor { <ip-address> |
<TAG> } weight command
recovers the default weights.
neighbor { <ip-address> | <TAG> } distribute-list
{ <access-list-number> | <name> } { in | out }
no neighbor { <ip-address> | <TAG> }
distribute-list { <access-list-number> | <name> }
{ in | out }
Filter neighbor route update; format
“no” of the no neighbor
{ <ip-address> | <TAG> }
distribute-list
{ <access-list-number> |
<name> } { in | out } command
cancels route filtering.
neighbor { <ip-address> | <TAG> }
route-reflector-client
no neighbor { <ip-address> | <TAG> }
route-reflector-client
Configure the current switch as
route reflector and specify a client;
the no neighbor { <ip-address> |
<TAG> } route-reflector-client
command deletes a client.
neighbor { <ip-address> | <TAG> } next-hop-self
no neighbor { <ip-address> | <TAG> }
next-hop-self
When sending route, configure
Next-Hop as its address; the no
neighbor { <ip-address> |
<TAG> } next-hop-self command
cancels the setting.
neighbor { <ip-address> | <TAG> } version
<value>
no neighbor { <ip-address> | <TAG> } version
Specify the BGP version
communicating with BGP
neighbors; the no neighbor
{ <ip-address> | <TAG> } version
command recovers default setting.
neighbor { <ip-address> | <TAG> } route-map
<map-name> {in | out}
no neighbor { <ip-address> | <TAG> } route-map
<map-name> {in | out}
Apply a route map to incoming or
outgoing routes; the no neighbor
{ <ip-address> | <TAG> }
route-map <map-name> {in | out}
command cancels the setting of
route reflector.
neighbor { <ip-address> | <TAG> }
soft-reconfiguration inbound
no neighbor { <ip-address> | <TAG> }
soft-reconfiguration inbound
Store the route information from
neighbor or peers; the no neighbor
{ <ip-address> | <TAG> }
soft-reconfiguration inbound
command cancels the storage.
neighbor { <ip-address> | <TAG> } shutdown
no neighbor { <ip-address> | <TAG> } shutdown
Shutdown BGP neighbor or peers;
the no neighbor { <ip-address> |
<TAG> } shutdown command
activates the closed BGP neighbor
or peers.