PLANET XGS3-24040 User Manual
Page 517

Chapter 56 RSPAN Configruation
56-3
1. Configure RSPAN VLAN
Command
Explanation
VLAN Configuration Mode
remote-span
no remote-span
To configure the specified VLAN as
RSPAN VLAN. The no command will
remove the configuration of RSPAN
VLAN.
2. Configure mirror source port (CPU)
Command
Explanation
Global Mode
monitor session <session> source
{interface <interface-list> | cpu [slot
<slotnum>]} {rx| tx| both}
no monitor session <session> source
{interface <interface-list> | cpu [slot
<slotnum>]}
To configure mirror source port; The no
command deletes the mirror source port.
3. Configure mirror destination port
Command
Explanation
Global Mode
monitor session <session> destination
interface <interface-number>
no monitor session <session> destination
interface <interface-number>
To configure mirror destination interface;
The no command deletes the mirror
destination port.
4. Configure reflector port
Command
Explanation
Global Mode
monitor session <session> reflector-port
<interface-number>
no monitor session <session> reflector-port
To configure the interface to reflector
port; The no command deletes the
reflector port.
5. Configure remote VLAN of mirror group
Command
Explanation
Global Mode
monitor session <session>
remote vlan <vid>
no monitor session <.session> remote vlan
To configure remote VLAN of mirror
group, the no command deletes the
remote VLAN of mirror group.