PLANET XGS3-24040 - Manual (Page 133)

Chapter 14 VLAN Configuration
14-22
Figure 1-9 VLAN typical apply topology Figure
Configuration items Configuration Explanation
Voice VLAN Global configuration on the Switch.
Configuration procedure:
Switch 1:
Switch(config)#vlan 100
Switch(Config-Vlan100)#exit
Switch(config)#voice-vlan vlan 100
Switch(config)#voice-vlan mac 00-30-4f-11-22-33 mask 255 priority 5 name company
Switch(config)#voice-vlan mac 00-30-4f-11-22-55 mask 255 priority 5 name company
Switch(config)#interface ethernet 1/10
Switch(Config-If-Ethernet1/10)#switchport mode trunk
Switch(Config-If-Ethernet1/10)#exit
Switch(Config)#interface ethernet 1/1
Switch(Config-If-Ethernet1/1)#switchport mode hybrid
Switch(Config-If-Ethernet1/1)#switchport hybrid allowed vlan 100 untag
Switch(Config-If-Ethernet1/1)#exit
Switch(Config)#interface ethernet 1/2
Switch(Config-If-Ethernet1/2)#switchport mode hybrid
Switch(Config-If-Ethernet1/2)#switchport hybrid allowed vlan 100 untag
Switch(Config-If-Ethernet1/2)#exit
14.6.4 Voice VLAN Troubleshooting
 Voice VLAN can not be applied concurrently with MAC-base VLAN
 The Voice VLAN support maximum 1024 sets of voice equipments, the exceeded number of
equipments will not be supported
 The Voice VLAN on the port is enabled by default. If the configured data can no longer enter the Voice
VLAN during operation, please check if the Voice VLAN function has been disabled on the port.
IP-phone1 IP-phone2
Switch