PLANET XGS3-24040 - Manual (Page 316)

Chapter 39 BGP
39-10
neighbor <ip-address> peer-group
<TAG>
no neighbor <ip-address> peer-group
<TAG>
Make a neighbor a member of the peer group.
The no neighbor <ip-address> peer-group
<TAG> command cancels the specified
member.
7．Configure neighbors and peer Groups’ parameters
Command Explanation
BGP configuration mode
neighbor {<ip-address> | <TAG>} remote-as
<as-id>
no neighbor {<ip-address> | <TAG>} remote-as
<as-id>
Specify a BGP neighbor; format “no”
of the no neighbor {<ip-address> |
<TAG>} remote-as <as-id>
command deletes the neighbor.
neighbor { <ip-address> | <TAG> } description
<.LINE>
no neighbor { <ip-address> | <TAG> }
description
Associate a description with a
neighbor; the no neighbor
{<ip-address> | <TAG>}
description command deletes this
description.
neighbor { <ip-address> | <TAG> }
default-originate [route-map <NAME>]
no neighbor { <ip-address> | <TAG> }
default-originate [route-map <NAME>]
Permit to send the default route
0.0.0.0; the no neighbor
{ <ip-address> | <TAG> }
default-originate [route-map
<NAME>] command cancels
sending default route.
neighbor { <ip-address> | <TAG> }
send-community
no neighbor { <ip-address> | <TAG> }
send-community
Configure the community attributes
sent to the neighbor.
neighbor { <ip-address> | <TAG> } timers <keep
alive> <holdtime>
no neighbor { <ip-address> | <TAG> } timers
Configure a particular neighbor’s
keep-alive and hold-time timer; the
no neighbor {<ip-address> |
<TAG>} timers command recovers
the default value.
neighbor {<ip-address> | <TAG>}
advertisement-interval <seconds>
no neighbor {<ip-address> | <TAG>}
advertisement-interval
Configure the min interval of
sending BGP routing information;
the no neighbor {<ip-address> |
<TAG>} advertisement-interval
command recovers the default
value.
neighbor {<ip-address> | <TAG>} ebgp-multihop
[<1-255>]
no neighbor {<ip-address> | <TAG>}
ebgp-multihop
Configure the allowance of EBGP
connections with networks
connected indirectly; the no
neighbor {<ip-address> | <TAG>}
ebgp-multihop command cancels