TP-Link Omada ER8411 VPN Router - Manual (Page 101)

User Guide 92
Configuring Transmission Routing Configurations
6
Routing Configurations
With routing configurations, you can:
■ Configure the static routing
■ Configure the policy routing rule
■ View the routing table
6.1 Configuring the Static Routing
Choose the menu Transmission> Routing > Static Route and click Add to load the
following page.
Figure 6-1 Configuring the Static Routing
Specify the name of the static route entry and configure other related parameters. Then
click OK .
Destination IP Specify the destination IP address the route leads to.
Subnet Mask Specify the subnet mask of the destination network.
Next Hop Specify the IP address to which the packet should be sent next.
Interface Specify the physical network interface through which this route is accessible.
Metric Define the priority of the route. A smaller value means a higher priority. The default
value is 0. It is recommended to keep the default value.