TP-Link Omada ER8411 VPN Router User Manual
Page 28
Configuring Network
WAN Configuration
User Guide 19
■
Configuring the L2TP
Choose the menu
Network
>
WAN
>
SFP+
WAN1
to load the following page.
Figure 2-5
Configuring the L2TP
In the
Connection Configuration
section, select the connection type as L2TP. Enter the
corresponding parameters and click
Save
.
Connection Type
Choose the connection type as L2TP if your ISP provides you with an L2TP account.
Username
Enter the L2TP username provided by your ISP.
Password
Enter the L2TP password provided by your ISP.
Connection
Mode
Choose the connection mode, including
Connect Automatically
,
Connect Manually
and
Time-Based.
Connect Automatically:
The router will activate the connection automatically when
the router reboots or the connection is down.
Connect Manually:
You can manually activate or terminate the connection.
Time-Based:
During the specified period, the router will automatically activate the
connection.