TP-Link Omada ER8411 VPN Router - Manual (Page 146)

Configuring Behavior Control Configuration Examples
User Guide 137
5) On the same page, click Add . Select “RD_Dept” as the IP Group , “Blacklist” as the
Policy , “All” as the Web Group , and “Any” as the Effective Time . Click OK .
This rule means that the hosts in the R&D department are denied access to all websites
at all times.
Figure 3-6 Configure Blacklist Rule
6) On the same page, verify your configurations. In the Web Filtering List, the rule with a
smaller ID has a higher priority. Since the router matches the rules beginning with the
highest priority, make sure the Whitelist rule has the smaller ID number. In this way,
the router allows the hosts to access the Whitelist website and denies them to access
others.
Figure 3-7 Verify Configuration Result
7) In the General section on the same page, enable Web Filtering globally and click Save .
Figure 3-8 Enable Web Filtering