TP-Link Omada ER8411 VPN Router - Manual (Page 160)

Configuring VPN L2TP Configuration
User Guide 151
3
L2TP Configuration
To complete the L2TP configuration, follow these steps:
1) Configure the VPN IP pool.
2) Configure L2TP globally.
3) Configure the L2TP server/client.
4) (Optional) Configure the L2TP users
.
5) Verify the connectivity of the L2TP VPN tunnel.
Configuration Guidelines
■ When the network mode is configured as Client-to-LAN and the router acts as the L2TP
server, you don’t need to configure the L2TP client on the router.
■ When the network mode is configured as LAN-to-LAN and the router acts as the L2TP
client gateway, you don’t need to configure the L2TP users on the router.
3.1 Configuring the VPN IP Pool
Choose the menu Preferences> VPN IP Pool > VPN IP Pool and click Add to load the
following page.
Figure 3-1 Configuring the VPN IP Pool
Follow these steps to configure the VPN IP Pool :
1) Specify the name of the IP Pool.
2) Specify the starting IP address and ending IP address for the IP Pool.