TP-Link Omada ER8411 VPN Router - Manual (Page 111)

User Guide 102
Configuring Transmission Configuration Examples
■ Configuring the Policy Routing Rules
1) Choose the menu Preferences > IP Group > IP Address to load the configuration page,
and click Add . Specify the IP address name as tp, the IP address type as IP Address
Range (192.168.0.2-192.168.0.3). Click OK .
Figure 7-11 Configuring the IP Address
2) Choose the menu Preferences > IP Group > IP Address to load the configuration
page and click Add . Specify the IP group name as group1, the IP address name as tp to
reference the IP address you have created. Click OK .
Figure 7-12 Configuring the IP Group
3) Choose the menu Transmission > Routing > Policy routing to load the configuration
page, and click Add .
Specify the policy routing rule name as policy1, the service type as HTTP, the source IP
as group1, the destination IP as IPGROUP_ANY which means no limit. Choose WAN1,
and keep Status of this entry as Enable . Click OK .