TP-Link Omada ER8411 VPN Router - Manual (Page 131)

User Guide 122
Configuring Firewall Configuration Examples
Figure 3-3 Configure IP Group
3) Choose the menu Preferences > Service Type > Service Type to load the
configuration page, and click Add . Specify the service type name as “HTTPS”, select
the protocol as “TCP”, specify the source port range as “0-65535” and destination port
range as “443-443”, and click OK .
Figure 3-4 Configure HTTPS Service Type
4) Choose the menu Firewall > Access Control > Access Control to load the
configuration page, and click Add . Specify a name for this rule. Select “Allow” as the rule
policy, “HTTP” as the service type, “LAN -> WAN” as the effective traffic direction, “RD_
Dept” as the source IP group, “IPGROUP_ANY” as the destination IP group, and “Any” as
the effective time. Click OK .
This rule means that all the HTTP packets from the R&D department are allowed to be
transmitted from LAN to the internet at any time.