TP-Link Omada ER8411 VPN Router - Manual (Page 232)

System Tools Controller Settings
User Guide 223
3
Controller Settings
To make your controller adopt your router, make sure the router can be discovered by the
controller. Controller Settings enable your router to be discovered in either of the following
scenarios.
■ If you are using Omada Cloud-Based Controller, Enable Cloud-Based Controller
Management .
■ If your router and controller are located in the same network, LAN and VLAN, the
controller can discover and adopt the router without any controller settings. Otherwise,
you need to inform the router of the controller’s URL/IP address, and one possible way
is to Configure Controller Inform URL .
For details about the whole procedure, refer to the User Guide of Omada SDN Controller.
The guide can be found on the download center of our official website: https://www.tp-link.
com/support/download/ .
3.1 Enable Cloud-Based Controller Management
Choose the menu System Tools > Controller Settings page. In the Cloud-Based Controller
Management section, enable Cloud-Based Controller Management and click Save . You can
check the connection status on this page.
Figure 3-1 Cloud-Based Controller Management