TP-Link Omada ER8411 VPN Router - Manual (Page 33)

User Guide 24
Configuring Network WAN Configuration
Secondary
Connection
Select the secondary connection type according to the requirements of your ISP.
The secondary connection is required for PPTP connection. The router will get some
necessary information after the secondary connection succeeded. The information
will be used in the PPTP connection process.
Dynamic IP: If you select the secondary connection type as Dynamic IP, the router
set up the secondary connection dynamically.
Static IP: If you select the secondary connection type as Static IP, you need to
configure IP Address, Subnet Mask, Default Gateway, Primary/Second DNS for the
secondary connection.
VPN Server/
Domain Name
Enter the VPN Server/Domain Name provided by your ISP.
IP Address Enter the IP address provided by your ISP for the secondary connection.
Subnet Mask Enter the subnet mask provided by your ISP for the secondary connection.
Default Gateway Enter the default gateway provided by your ISP for the secondary connection.
Primary/
Secondary DNS
Enter the primary/secondary DNS provided by your ISP for the secondary
connection.
Connect/
Disconnect
Click the button to active/terminate the connection.