TP-Link Omada ER8411 VPN Router - Manual (Page 90)

Configuring Transmission NAT Configurations
User Guide 81
Translated IP Specify the public IP address for the rule. The translated IP address cannot be the
broadcast address and the IP address of the WAN interface.
DMZ Forwarding Check the box to enable DMZ Forwarding. The packets transmitted to the
translated IP address will be forwarded to the host of original IP address if DMZ
Forwarding is enabled.
Description (Optional) Enter a brief description for the rule to facilitate your management.
Status Check the box to enable the rule.
2) Click OK .
Note:
One-to-One NAT takes effect only when the connection type of WAN is Static IP.
When setting open ports for NAT, do not select the reserved ports (1723/1701 is reserved for PPTP/
L2TP, 1194 is reserved for OpenVPN, and the specific ports you reserved).
2.2 Configuring the Virtual Servers
Choose the menu Transmission > NAT > Virtual Servers and click Add to load the
following page.
Figure 2-2 Configuring the Virtual Servers
Follow these steps to configure the Virtual Servers :
1) Specify the name of the Virtual Server rule and configure other related parameters.
Interface Specify the effective interface for the rule. If you choose multiple ports, the entry
will be applied to all selected ports simultaneously.
External Port Enter the service port or port range of the router for external network access. The
ports or port ranges cannot overlap with those of other virtual server rules.