TP-Link Omada ER8411 VPN Router - Manual (Page 82)

Configuring Preferences VPN IP Pool Configuration
User Guide 73
4
VPN IP Pool Configuration
In VPN IP Pool, you can preset VPN IP pools that will appear as options for you to choose
when configuring L2TP VPN and PPTP VPN. After creating the entries, you can apply them
to different rules, which saves you from repeatedly setting up the same information.
Choose the menu
Preferences > VPN IP Pool > VPN IP Pool and click Add to load the
following page.
Figure 4-1 Add an IP Pool Entry
Follow these steps to add an IP Pool:
1) Enter a name and specify the starting and ending IP address of the IP Pool.
IP Pool Name Enter a name for the IP Pool. Only letters, digits or underscores are allowed.
Starting IP Address/
Ending IP Address
Specify the starting and ending IP address. The range of the IP pool cannot
overlap with the existing IP pools.
2) Click OK .
Note:
The range of the newly created IP pool cannot overlap with the IP range of the DHCP pool and other
existing VPN IP pools.
The VPN IP pool entry that has been referenced by a rule cannot be deleted unless the rule no longer
references the entry.