TP-Link Omada ER8411 VPN Router - Manual (Page 109)

User Guide 100
Configuring Transmission Configuration Examples
2) Specify the entry name as ftp, choose the interface as WAN1, and specify the internal/
external port as 21, enter the IP address of FTP server (192.168.0.100) as the internal
server IP. Select the protocol as All, then keep Status of this entry as Enable . Click OK .
Figure 7-8 Configuring the Virtual Server
7.4 Example for Configuring Policy Routing
7.4.1 Network Requirements
The network administrator has a router with 3 computers (192.168.0.2-192.168.0.4)
connected to the LAN side, all computers are routed to internet by WAN1 port and WAN2
port, the requirements are as follows:
■ WAN2 link is used to backup WAN1 link to keep an always on-line network.
■ The two computers with IP addresses 192.168.0.2 and 192.168.0.3 are required to use
WAN1 for web surfing, WAN2 for other internet activities.