TP-Link Omada ER8411 VPN Router - Manual (Page 57)

User Guide 48
Configuring Network IPv6 Configuration
DHCPv6 Your ISP assigns an IPv6 address and other parameters including the DNS server
address to your gateway using DHCPv6.
SLAAC+Stateless
DHCP
Your ISP assigns the IPv6 address prefix to your gateway and your gateway
automatically generates its own IPv6 address. Also, your ISP assigns other
parameters including the DNS server address to your gateway using DHCPv6.
Specified by ISP You should manually enter the IPv6 address provided by your ISP.
Prefix Delegation Select Enable to get an address prefix for your LAN port from your ISP, or Disable
to designate an address prefix for your LAN port manually. Clients in LAN will get an
IPv6 address with this prefix.
Prefix Delegation
Size
With Prefix Delegation enabled, enter the Prefix Delegation Size to determine the
length of the address prefix. You can get this value from your ISP.
DNS Address Select whether to get the DNS address dynamically from your ISP or designate the
DNS address manually.
Get dynamically
from ISP
Your ISP assigns an DNS address and to your gateway dynamically.
Use the following
DNS Addresses
You should manually enter the DNS address provided by your ISP.
Primary DNS/
Secondary DNS
Enter the DNS address manually or display the DNS address which is assigned by
your ISP.
Connect Click this button to connect to the internet.
Disconnect Click this button to disconnect from the internet.
■ Configuring the 6to4 Tunnel
Choose the menu Network > IPv6 > SFP+ WAN1 to load the following page.
Figure 8-6 Configuring the 6to4 Tunnel