TP-Link Omada ER8411 VPN Router - Manual (Page 168)

Configuring VPN PPTP Configuration
User Guide 159
Follow these steps to configure the PPTP server :
1) Specify the WAN port used for PPTP tunnel.
2) Specify whether to enable the MPPE encryption for the PPTP tunnel.
3) Enable the PPTP tunnel.
4) Click
OK .
4.4 Configuring the PPTP Client
Choose the menu VPN > PPTP > PPTP Client and click Add to load the following page.
Figure 4-4 Configuring the PPTP Client
Follow these steps to configure the PPTP client :
1) Specify the name of the PPTP tunnel and configure other relevant parameters of the
PPTP client according to your actual network environment.
Tunnel Specify the name of PPTP tunnel.
Account Name Specify the account name of PPTP tunnel. It should be configured identically on
server and client.
Password Specify the password of PPTP tunnel. It should be configured identically on server
and client.
WAN Specify the WAN port used for PPTP tunnel.
Server IP Specify the IP address or domain name of PPTP server.