TP-Link Omada ER8411 VPN Router - Manual (Page 98)

Configuring Transmission Load Balancing Configurations
User Guide 89
5
Load Balancing Configurations
With load balancing configurations, you can:
■ Configure the load balancing
■ Configure the link backup
■ Configure the online detection
5.1 Configuring the Load Balancing
Choose the menu Transmission > Load Balancing > Basic Settings to load the following
page.
Figure 5-1 Configuring the Load Balancing
Follow these steps to configure the load balancing :
1) In the General Section, enable load balancing function globally and click Save .
2) In the Basic Settings section, select the appropriate method for load balancing and
click Save .
Enable Application
Optimized Routing
With Application Optimized Routing enabled, the router will consider
the source IP address and destination IP address (or destination port)
of the packets as a whole and record the WAN port they pass through.
Then packets with the same source IP address and destination IP
address (or destination port) will be forwarded to the recorded WAN
port. This feature ensures that multi-connected applications work
properly.
Enable Bandwidth Based
Balance Routing on port(s)
Select the WAN port from the drop-down list on which bandwidth-
based balance routing is enabled.