Configuring the policy routing, 2 configuring the policy routing – TP-Link Omada ER8411 VPN Router User Manual
Page 102
Configuring Transmission
Routing Configurations
User Guide 93
Description
Enter a brief description for the rule.
Status
Check the box to enable the rule.
6.2 Configuring the Policy Routing
Choose the menu
Transmission > Routing > Policy Routing
and click
Add
to load the
following page.
Figure 6-2
Configuring the Policy Routing
Specify the name of the policy routing entry and configure other related parameters. Then
click
OK
.
Service Type
Specify the service type for the rule.
Source IP
Enter the source IP range for the rule. 0.0.0.0 - 0.0.0.0 means any IP is acceptable.
Destination IP
Enter the destination IP range for the rule. 0.0.0.0 - 0.0.0.0 means any IP is acceptable.
WAN
Specify the outcoming port for the rule. If you choose multiple ports, the entry will be
applied to all selected ports simultaneously.
Effective Time
Specify the effective time for the rule.