TP-Link Omada ER8411 VPN Router - Manual (Page 172)

Configuring VPN OpenVPN Configuration
User Guide 163
5
OpenVPN Configuration
To complete the OpenVPN Configuration, follow these steps:
1) Configure the OpenVPN server/client.
2) Check the tunnel list to verify the connectivity of the OpenVPN tunnel.
Configuration Guidelines
■ If you only use the router as the OpenVPN server, you don’t need to configure the
OpenVPN client.
5.1 Configuring the OpenVPN Server
Choose the menu VPN > OpenVPN > OpenVPN Server and click Add to load the following
page.
Figure 5-1 Configuring the OpenVPN Server
Specify the name of the OpenVPN server, configure other relevant parameters according
to your actual network environment, and click OK .
Server Name Enter a name to identify the VPN server.
Status Check the box to enable the OpenVPN server.
Protocol Select the communication protocol for the gateway which works as an OpenVPN
Server. Two communication protocols are available: TCP and UDP.