TP-Link Omada ER8411 VPN Router - Manual (Page 35)

User Guide 26
Configuring Network LAN Configuration
IGMP Version Configure the IGMP version as V2 or V3 according to your ISP.
IGMP Interface Select the interface on which the IGMP Proxy takes effect.
Note:
• IGMP only takes effect when WAN mode is enabled for port WAN.
Figure 3-2 Configuring the LAN network
In the Network List section, set up the LAN network or click Add to add new networks, and
configure the related parameters.
Name set up the LAN network or click Add to add new networks, and configure the related
parameters.
IP Address Enter the IP address of the LAN port. To make your local network devices connect to
the internet, you need to set the IP address of the LAN port as the default gateway of
those devices.
Subnet Mask Enter the subnet mask of the LAN port (255.255.255.0 by default). The IP addresses
of all devices which connect to the LAN ports should be in the same subnet as the IP
address of the LAN port.
VLAN Specify the VLAN of the LAN port, only the devices in the specified VLAN can access
and manage the gateway.