TP-Link Omada ER8411 VPN Router - Manual (Page 59)

User Guide 50
Configuring Network IPv6 Configuration
■ Configuring the Pass-Through (Bridge)
Choose the menu Network > IPv6 > SFP+ WAN1 to load the following page.
Figure 8-7 Configuring the Pass-Through (Bridge)
In Internet section, select the connection type as Pass-Through (Bridge). No configuration
is required for this type of connection.
8.3 Configuring IPv6 for the LAN Port
Choose the menu Network > IPv6 > LAN > Operation to load the following page.
Figure 8-8 Select Assigned Type
In the General section, select the proper Assigned Type, which is determined by the
compatibility of clients in your local network, and configure the parameters according to
the requirements of your ISP. Then click OK .