TP-Link Omada ER8411 VPN Router - Manual (Page 144)

Configuring Behavior Control Configuration Examples
User Guide 135
■ In URL Filtering, you can directly specify the official website address in the filtering rule.
Here we take Web Group Filtering as an example. The configuration overview is as follows:
1) Add an IP group for the R&D department in the
Preferences module.
2) Create a web group with the group member www.tp-link.com.
3) Add a Whitelist rule to allow the R&D department users to access www.tp-link.com.
4) Add a Blacklist rule to forbid the R&D department users from accessing all websites.
Note that the priority of this rule should be lower than the Whitelist rule.
3.1.3 Configuration Procedure
Follow the steps below to complete the configuration:
1) Choose the menu
Preferences > IP Group > IP Address to load the configuration page,
and click Add . Specify a name “RD”, select IP Address Range and enter the IP address
range of the R&D department. Click OK .
Figure 3-2 Configure IP Address Range
2) Choose the menu Preferences > IP Group > IP Group to load the configuration page,
and click Add . Specify a group name “RD_Dept”, select the preset address range "RD"
and click OK .
Figure 3-3 Configure IP Group