TP-Link Omada ER8411 VPN Router - Manual (Page 34)

Configuring Network LAN Configuration
User Guide 25
3
LAN Configuration
The LAN port is used to connect to the LAN clients, and works as the default gateway
for these clients. You can configure the DHCP server for the LAN clients, and clients will
automatically be assigned to IP addresses if the method of obtaining IP addresses is set as
“Obtain IP address automatically”.
For LAN configuration, you can:
■ Configure the IP address of the LAN port.
■ Configure the DHCP server.
■ Reserve IP addresses for certain LAN clients
3.1 Configuring the IGMP Proxy
Choose the menu Network > LAN > LAN to load the following page.
Figure 3-1 Configuring the LAN IP Address
In the Settings section, enable IGMP Proxy, select the corresponding parameters and click
Save .
IGMP Proxy If you want the local network devices to receive multicast data from the Internet,
check the box to enable IGMP Proxy. This feature is used to detect whether there is
any multicast member connected to the LAN ports.