TP-Link Omada ER8411 VPN Router - Manual (Page 176)

Configuring VPN Users Configuration
User Guide 167
6
Users Configuration
To configure the accounts of users, Choose the menu VPN > Users > Users and click Add
to load the following page.
Figure 6-1 Configuring the User Account
Enter the account name and password, configure other relevant parameters according to
your actual network environment, and click OK .
Account Name Specify the account name used for the VPN tunnel.
Password Specify the account password used for the VPN tunnel. Your VPN clients will use
the account name and password for authentication.
Protocol Specify the protocol for the VPN tunnel. There are two types: L2TP and PPTP.
Local IP
Address
Specify the local virtual IP address for the VPN server. Please avoid using the IP
address in the DHCP range, which may cause IP confliction, you can enter the LAN
IP of the router. To find out the DHCP Range, go to Network > LAN > Network List
and view the information of the desired network.
IP Address
Pool
Specify the IP address pool from which the IP address will be assigned to the VPN
client. The IP Pool referenced here can be created on the Preferences > VPN IP
Pool page.
DNS Address Specify the DNS address to be assigned to the VPN client (8.8.8.8 for example),
you can enter the LAN IP of the router.