TP-Link Omada ER8411 VPN Router - Manual (Page 237)

User Guide 228
System Tools Diagnostics
6
Diagnostics
In Diagnostics module, you can configure the following features:
■ Diagnostics
■ Remote Assistance
6.1 Diagnostics
Ping and traceroute are both used to test the connectivity between two devices in the
network. In addition, ping can show the roundtrip time between the two devices directly
and traceroute can show the IP address of routers along the route path.
6.1.1 Configuring Ping
Choose the menu System Tools > Diagnostics > Diagnostics to load the following page.
Figure 6-1 Configuring Diagnostics
Follow these steps to configure Diagnostics:
1) In
Diagnostics section, select Ping and configure the following parameters.
Diagnostic Tool Select Ping to test the connectivity between the router and the desired device.