TP-Link Omada ER8411 VPN Router - Manual (Page 132)

Configuring Firewall Configuration Examples
User Guide 123
Figure 3-5 Configure Allow Rule for HTTP Service
5) Choose the menu Firewall > Access Control > Access Control to load the
configuration page, and click Add . Specify a name for this rule. Select “Allow” as the rule
policy, “HTTPS” as the service type, “LAN -> WAN” as the effective traffic direction, “RD_
Dept” as the source IP group, “IPGROUP_ANY” as the destination IP group, and “Any” as
the effective time. Click OK .
This rule means that all the HTTPS packets from the R&D department are allowed to be
sent from the LAN to the internet at any time.
Figure 3-6 Configure Allow Rule for HTTPS Service
6) Choose the menu Firewall > Access Control > Access Control to load the
configuration page, and click Add . Specify a name for this rule. Select “Allow” as the rule
policy, “DNS” as the service type, “LAN -> WAN” as the effective traffic direction, “RD_