TP-Link Omada ER8411 VPN Router - Manual (Page 55)

User Guide 46
Configuring Network IPv6 Configuration
■ Configuring the Dynamic IP (SLAAC/DHCPv6)
Choose the menu Network > IPv6 > SFP+ WAN1 to load the following page.
Figure 8-4 Configuring the Dymanic IP (SLAAC/DHCPv6)
In Internet section, select the connection type as Dynamic IP (SLAAC/DHCPv6). Enter the
corresponding parameters and click Save .
IPv6 Address/
Primary DNS/
Secondary DNS
These parameters are automatically assigned by your ISP.
Renew Click this button to get new IPv6 parameters assigned by your ISP.
Release Click this button to release all IPv6 addresses assigned by your ISP.
Get IPv6 Address Select the proper method whereby your ISP assigns IPv6 address to your gateway.
Auto Select Auto to get an IPv6 address automatically.
DHCPv6 Your ISP assigns an IPv6 address and other parameters including the DNS server
address to your gateway using DHCPv6.
SLAAC+Stateless
DHCP
Your ISP assigns the IPv6 address prefix to your gateway and your gateway
automatically generates its own IPv6 address. Also, your ISP assigns other
parameters including the DNS server address to your gateway using DHCPv6.
Prefix Delegation Select Enable to get an address prefix for your LAN port from your ISP, or Disable
to designate an address prefix for your LAN port manually. Clients in LAN will get an
IPv6 address with this prefix.
Prefix Delegation
Size
With Prefix Delegation enabled, enter the Prefix Delegation Size to determine the
length of the address prefix. You can get this value from your ISP.
DNS Address Select whether to get the DNS address dynamically from your ISP or designate the
DNS address manually.