TP-Link Omada ER8411 VPN Router - Manual (Page 47)

User Guide 38
Configuring Network Switch Configuration
Flow Control Check the box to enable the flow control function.
Flow Control is the process of managing the data transmission of the sender to avoid
the receiver getting overloaded.
Negotiation
Mode
Select the Negotiation Mode for the port. You can select Auto (Auto-negoation), or
manually select the speed and duplex mode.
6.5 Viewing Port Status
Choose the menu Network > Switch > Port Status to load the following page.
Figure 6-5 Viewing Port Status
Status Displays the port status.
Link Down : The port is not connected.
Link Up : The port is working normally.
Speed (Mbps) Displays the port speed.
Duplex Mode Displays the duplex mode of the port.
Flow Control Displays if the Flow Control is enabled.