TP-Link Omada ER8411 VPN Router - Manual (Page 56)

Configuring Network IPv6 Configuration
User Guide 47
Get dynamically
from ISP
Your ISP assigns an DNS address to your gateway dynamically.
Use the following
DNS Addresses
You should manually enter the DNS address provided by your ISP.
Primary DNS/
Secondary DNS
Enter the DNS address manually or display the DNS address which is assigned by
your ISP.
■ Configuring the PPPoE
Choose the menu Network > IPv6 > SFP+ WAN1 to load the following page.
Figure 8-5 Configuring the PPPoE
In Internet section, select the connection type as PPPoE. Enter the corresponding
parameters and click Save .
PPPoE same
session with IPv4
connection
If this option is enabled, IPv6 uses the same PPPoE session as IPv4.
Username/
Password:
Enter these parameters as provided by your ISP.
IPv6 Address This address will be automatically assigned by your ISP after you enter the username
and password and click Connect .
Connect Click this button to connect to the internet.
Disconnect Click this button to disconnect from the internet.
Get IPv6 Address Select the proper method whereby your ISP assigns IPv6 address to your gateway.
Auto Select Auto to get an IPv6 address automatically.