TP-Link Omada ER8411 VPN Router - Manual (Page 42)

Configuring Network MAC Configuration
User Guide 33
MAC Clone MAC Clone provides a shortcut to changing the MAC Address.
Restore Factory MAC : Click this button to restore the MAC address to the factory
default value.
Clone Current PC’s MAC : Click this button to clone the MAC address of the PC you
are currently using to configure the router. It’s only available for the WAN ports.
Note:
When cloning curent management host’s MAC on the WAN port, the management PC should be
connected to the LAN port.
If the connection type on the WAN port is PPPoE, L2TP or PPTP, changing the MAC address of the
WAN port may cause the connection to be terminated or re-established.