TP-Link Omada ER8411 VPN Router - Manual (Page 183)

User Guide 174
Configuring SSL VPN SSL VPN Server Configuration
4
SSL VPN Server Configuration
In SSL VPN Server, you can enable the feature and configure the SSL VPN settings.
4.1 Configuring the SSL VPN Server
Choose the menu SSL VPN > SSL VPN Server > SSL VPN Server to load the following
page.
Figure 4-1 Configuring the SSL VPN Server
Check the box to enable the feature, then configure the corrresponding parameters
Service Port Select the port for the SSL VPN server to listen on, and the VPN tunnel will take effect
on the port.
Virtual IP Pool Select a virtual IP Pool, and the SSL VPN server will assign an IP address to a connected
client within the pool. To create an IP Pool, go to Preferences > VPN IP Pool > VPN IP
Pool .
The number of IP addresses in the IP pool should not be less than 4.
Primary DNS Specify the IP address of the DNS server.
Please assign the LAN IP to the SSLVPN DNS server.