TP-Link Omada ER8411 VPN Router - Manual (Page 190)

Configuring SSL VPN Authentication
User Guide 181
Status Displays the status of the user entry.
7.2 Configuring the Radius Server
Choose the menu SSL VPN > Authentication > Radius Server and click Add to load the following
page.
Figure 7-2 Configuring the Radius Server
Specify the name for the RADIUS server, configure relevant parameters and click OK .
Authentication
Server IP
Specify the IP address of the RADIUS server.
Authentication
Mode
Select the authentication protocol for the RADIUS server. Two authentication
protocols are available: PAP and CHAP.
Authentication
Port
Specify the UDP destination port on the authentication server for authentication
requests. The recommended port is 1812.