TP-Link Omada ER8411 VPN Router - Manual (Page 54)

Configuring Network IPv6 Configuration
User Guide 45
Note:
If Internet Connection Type of WAN / SFP WAN is selected as Pass-Through (Bridge), the IPv6
parameters of the LAN port and the other WAN ports cannot be configured.
■ Configuring the Static IP
Choose the menu Network > IPv6 > SFP+ WAN1 to load the following page.
Figure 8-3 Configuring the Static IP
In Internet section, select the connection type as Static IP. Enter the corresponding
parameters and click Save .
IPv6 Address/
Prefix Length/
Default Gateway/
Primary DNS/
Secondary DNS
Enter these parameters as provided by the ISP.