TP-Link Omada ER8411 VPN Router - Manual (Page 89)

User Guide 80
Configuring Transmission NAT Configurations
2
NAT Configurations
With NAT configurations, you can:
■ Configure the One-to-One NAT.
■ Configure the Virtual Servers.
■ Configure the Port Triggering.
■ Configure the NAT-DMZ.
■ Configure the ALG.
2.1 Configuring the One-to-One NAT
Choose the menu Transmission > NAT > One-to-One NAT and click Add to load the
following page.
Figure 2-1 Configuring the One-to-One NAT
Follow these steps to configure the One-to-One NAT :
1) Specify the name of the One-to-One NAT rule and configure other related parameters.
Interface Specify the effective interface for the rule only when the connection type is Static
IP. If you choose multiple ports, the entry will be applied to all selected ports
simultaneously.
Original IP Specify the private IP address for the rule. The original IP address cannot be the
broadcast address and the IP address of the LAN interface.