Ipsec vpn configuration, Configuring the ipsec policy, Configuring the basic parameters – TP-Link Omada ER8411 VPN Router User Manual
Page 154: 1 configuring the ipsec policy
Configuring VPN
IPSec VPN Configuration
User Guide 145
2
IPSec VPN Configuration
To complete the IPSec VPN configuration, follow these steps:
1) Configure the IPSec Policy.
2) Verify the connectivity of the IPSec VPN tunnel.
Configuration Guidelines
■
For both ends of the VPN tunnel, the Pre-shared key, Proposal, Exchange Mode, and
Encapsulation Mode should be identical.
■
For both ends of the VPN tunnel, the Remote Gateway, Local/Remote Subnet, Local/
Remote ID Type should be matched.
2.1 Configuring the IPSec Policy
2.1.1 Configuring the Basic Parameters
Choose the menu
VPN > IPSec > IPSec Policy
and click
Add
to load the following page.
Figure 2-1
Configuring the Basic Parameters
Follow these steps to configure the basic parameters
:
1) Specify the name of the IPSec Policy.