TP-Link Omada ER8411 VPN Router - Manual (Page 124)

Configuring Firewall Firewall Configuration
User Guide 115
2.4 Configuring Access Control
Choose the menu Firewall > Access Control > Access Control and click Add to load the
following page.
Figure 2-11 Access Control
This table displays the Access Control entries. Follow the steps below to add a new Access
Control entry.
1) Click
Add and the following page will appear.
Figure 2-12 Access Control
2) Configure the required parameters and click OK :
Name Specify a name for the rule. It can be 50 characters at most. The name of
each entry cannot be repeated.
Policy Select whether to block or allow the packets matching the rule to access the
network.
Service Type Select the effective service for the rule. The service referenced here can be
created on the Preferences > Service Type page.
Direction Select the effective traffic direction for the rule.