TP-Link Omada ER8411 VPN Router - Manual (Page 53)

User Guide 44
Configuring Network IPv6 Configuration
Figure 8-2 Select Internet Connection Type
In the Internet section, select the proper Internet Connection Type and configure the
parameters according to the requirements of your ISP. Then click Save .
Internet
Connection Type
Choose the proper Internet Connection Type according to the requirements of your
ISP.
8.2 Configuring the WAN Connection
The router supports five connection types: Static IP, Dynamic IP (SLAAC/DHCPv6),
PPPoE, 6to4 Tunnel, PPTP, you can choose one according to the service provided by your
ISP.
Static IP : If your ISP provides you with a fixed IP address and the corresponding
parameters, choose Static IP.
Dynamic IP (SLAAC/DHCPv6) : If your ISP automatically assigns the IP address and the
corresponding parameters, choose Dynamic IP.
PPPoE : If your ISP provides you with a PPPoE account, choose PPPoE.
6to4 Tunnel : Select this type if your ISP uses 6to4 deployment for assigning address.
Pass-Through (Bridge) : Select this type if your ISP uses Pass-Through (Bridge) network
deployment.