TP-Link Omada ER8411 VPN Router - Manual (Page 46)

Configuring Network Switch Configuration
User Guide 37
Choose the port and configure the ingress frames or egress frames limitation, then click
Save .
Ingress Limit Check the box to enable the Ingress Limit feature.
Ingress Frame
Type
Specify the ingress frame type to be limited. It is All Frames by default.
All Frames : The ingress rate of all frames is limited.
Broadcast : The ingress rate of broadcast frames is limited.
Broadcast and Multicast : The ingress rate of broadcast and multicast frames is
limited.
Ingress Rate
(Mbps)
Specify the limit rate for the ingress packets.
Egress Limit Check the box to enable Egress Limit feature.
Egress Rate
(Mbps)
Specify the limit rate for the egress packets.
6.4 Configuring Port Config
You can configure the flow control and negotiation mode for the port.
Choose the menu
Network > Switch > Port Config to load the following page.
Figure 6-4 Configuring Flow Control and Negotiation
Configure the flow control and negotiation mode for a port.