TP-Link Omada ER8411 VPN Router - Manual (Page 63)

User Guide 54
Configuring Network IPv6 Configuration
■ Configuring the pass-through
Choose the menu Network > IPv6 > LAN to load the following page.
Figure 8-12 Configuring the pass-through
In Assigned Type section, select the connection type as pass-through. Enter the
corresponding parameters and click OK .
IPv6 Passthrough
WAN
Select the WAN port using Pass-Through (Bridge) for the IPv6 connection.
Note:
• If Internet Connection Type of WAN / SFP WAN is selected as Pass-Through (Bridge), the IPv6
parameters of the LAN port and the other WAN ports cannot be configured.
• If Prefix Delegation of WAN / SFP WAN is enabled, the Address Prefix of LAN is automatically
assigned by your ISP and you cannot designate an address prefix manually.