McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 - Manual (Page 111)

6
Configuring an F_Port Extension over an Ethernet WAN 6-5
Configuring a 2x2 Ethernet Wide Area Network
2. Click the drop-down menu next to the UltraNet Edge 3000 and
select the
Edge 3000
(2x2 - 1 Gbps Ethernet) node type.
The cursor will turn into crosshairs once you move the cursor
over the map area. The cursor must be crosshairs to complete the
current operation.
3. Click in the Network Map Area to create an instance of the
UltraNet Edge 3000 node.
Adding a Fibre Channel Interface
If this is the first time you are adding an UltraNet Edge 3000 node
to the Network Map, the Default Fibre Channel Interface Type
drop-down list will appear. Select the type of Fibre Channel
interface for the network type you are configuring.
— The first time you see the Default Fibre Channel Interface
Type drop-down list, select the interface type you want as the
Fibre Channel I/F default. This sets the default that UltraNet