McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 - Manual (Page 166)

7
7-28 McDATA UltraNet Edge 3000 User Guide
Configuring a 1x1 ATM Wide Area Network
For more information about the Switch WWN Proxy, see the
“Switch WWN Proxy” section in Chapter 3, Network Design
Criteria.
7. Select either Enable Disk Streaming and/or Enable Switch
WWN Proxy to enable this functionality.
8. Click Next.
The Create Data Path Wizard - Finish dialog box appears.
9. Click Finish to complete the configuration of this data path and
return to the Network Map.
The Network Map will appear and should look like this:
This completes the procedure for FC/IP interface data path
mapping.